G.P. Robokim Injector Kit

 

Refer to the arrow on the injector body for proper flow direction. Install the injector in the system downstream of the regulator unloader which is downstream of the pump. This injector will draw your chemical into the water stream at 125 PSI and 2.1 to 2.9 GPM, through your low-pressure nozzle. Injector WILL NOT draw chemicals above 250 PSI through your high-pressure nozzle. The amount of chemicals drawn in is controlled with the adjustment knob.

  • Maximum pressure: 3200 PSI.
  • Maximum temperature: 210 degrees F.
  • 2.1-2.9 GPM
  • Inlet port: 3/8″ MPT.
  • Outlet port: 3/8″ MPT.
  • Repair Kit: (chemical) Part #1270. (acid) Part #3846.
Categories: ,

Description

This Robokim injector kit comes complete with a 3/8″ plug on the inlet, and a 3/8″ quick connect socket on the outlet. In addition, 6 feet of clear plastic tubing and a chemical strainer are included. A downstream injector for low-pressure chemical applications. Features an adjustable metering knob.

Additional information

Weight1.2 lbs
Dimensions5.25 × 1.4 × 3 in

Reviews

There are no reviews yet.

Be the first to review “G.P. Robokim Injector Kit”

Your email address will not be published.