G.P. Downstream Injectors ( Adjustable)
$0.15 – $31.72
SPECIFICATIONS:
- Chemical draw up to 20%
- 4500 PSI maximum
- 190 F maximum
- 3/8″ MPT inlet & outlet
Description
Chemical Injector Specifications:
- Chemical draw up to 20%
- 4500 PSI maximum
- 190 F maximum
- 3/8″ MPT inlet & outlet
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from the container. Chemicals can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high-pressure mode.
NOTE: Length of hose will determine the ability of the injector to work properly. It is recommended to keep hose length at 100 feet or less.
Additional information
Weight | 0.42 lbs |
---|---|
Dimensions | 2.4 × 1.2 × 3.15 in |
Reviews
There are no reviews yet.