Waste Oil Furnace EL-140H

Heats 3500 Square Feet

Item Features

Commonly Used Fuels: Used crankcase oils, ATF, hydraulic fluid, No. 2 fuel oil, and diesel fuel

Fuel Metering Pump: Precision metering over a wide range of fuels

UL Certification: UL listed system

Fuel Flow Rate: 1.0 gallons / 3.78 liters per hour

BTU Input: 142,000 BTU / 41.6 kW per hour

Warm Air Temperature Rise: 100–120°F / 37.8-48.9 °C

Air Flow:

• Warm Air Outlet Dimensions
• 1000 cfm / 28 cu. m/min .
• 12"W x 12"H / 31cm W x 31cm H
• Ductible dual outlets
• Air outlet can be on left, right, or both sides

Primary Heat Exchanger:

18 gauge high temperature and corrosion resistant stainless steel. UL-rated

at 1500°F / 816 °C .

System Dimensions:

• Cabinet w/ Blower and Burner
• 250 Gallon Workbench Tank /
• 946.35 liter Workbench Tank
• 18H x 18"W x 92"L / 46cm H x 46cm W x 234 cm L
• 37.5"H x 32"W x 60"L (69"L w/pump) /
• 95cm H x 82 cm W x 153 cm L (176cm L w/pump)

Hour Meter: Analog (Clocks only actual burn time, not blower)

Exhaust Flue Diameter: 8" / 20.32cm diameter

Fuel Tank:

• Standard Tank
• Optional Tank
• Single wall, 250 gallon / 946.35 liter workbench
• Double wall workbench available

Electrical Requirements: 115 VAC, 60 Hz, 25 amps dedicated circuit

Standard Features:

• Integrated Air Compressor
• Barometric Damper
• Draft Gauge
• Squirrel Cage Blower

• Optional Features:
• Various Size Fuel Tanks
• Dual Warm Air Outlet Louvers