about the company
Parts & Accessories
BRUSHES AND HANDLES
COUPLERS AND PLUGS
SEWERS AND DUCTS
ALL PURPOSE CLEANERS
AUTOMOTIVE CARE & DETAILING
CARPET AND UPHOLSTERY
CONCRETE & ASPHALT CLEANERS
HEAVY DUTY CLEANERS
HOUSE WASH & WOOD RESTORATION
PARTS WASHER SOLVENT
SEAL 'N LOCK CONCRETE SEALER
V-SEAL CONCRETE SEALER
Super Wet 5 gallon container
Super Wet is a high solids, two-part water based pure urethane sealer that penetrates the pavers to provide a longer lasting protective barrier with superior joint stabilization (no need for polymeric sand) resulting in a 'wet look.' Super Wet is user friendly and environmentally safe. The high solids content of pure urethane wears evenly and lasts longer than solvent based sealers.
One day process (no down time)
Pavers will not turn white from moisture (eliminating call backs)
User friendly and environmentally safe
No toxic odors
Will not harm vegetation and inhibits weed growth and ant mines
Superior joint stabilization (no need for polymeric sand)
VOC compliant in all 50 states
UV Protection Plus
Typically, the application rate will vary from 150 to 200 sq. ft. per gallon, although this rate will vary depending on the texture, absorption rate of the surface and the width of the paver joints.
DIRECTIONS FOR USE
We recommend wearing protective goggles and latex gloves. For best results, apply Super Wet at temperatures between 60° F and 90° F. In cooler conditions, the sealer should be warmed to approximately 70° F. Do not apply if surface or ambient temperature s below 50°F. A test for compatibility, penetration and adhesion is recommended. If temperature is going to drop below freezing (32° F) make sure sealer has time to cure.
Super Wet is a 2 part urethane which comes packaged in a 2 gallon kit (3 ½ gallon pail) and a 5 gallon kit (6 gallon pail). Part B (metal container) is cradled inside of Part A (pail). Part A and Part B require mixing and stirring (2 minutes) prior to use. Super Wet can be diluted, after mixing with up to 2 parts water and 1 part sealer and makes up to 15 gallons. After mixing, the product must be used within two (2) hours and cannot be stored for future use.
Pavers with high absorption rate will require additional top coats of sealer to provide protective barrier and desired enhancement. Super Wet in not intended for submerged surfaces.
PLEASE CALL THE OFFICE FOR PRICES AND AVAILABILITY.