Products


Natural Luster 5 gallons

Natural Luster
Natural Luster is a high solids, low VOC water based urethane modified acrylic sealer that penetrates the pavers and provides a protective barrier with superior joint stabilization with a natural luster. Natural Luster is formulated to seal products made to ASTM C-936 specifications having an absorption rate of 5% or less. Pavers with higher absorption rate will require additional application(s) of sealer.

ADVANTAGES

One day process (no down time)
Pavers will not turn white from moisture (eliminating call backs)
User friendly and environmentally safe
30% Solids
No toxic odors
Will not harm vegetation and inhibits weed growth and ant mines
Minimizes algae and mold
Superior joint stabilization (no need for polymeric sand)
VOC Compliant in all 50 states
UV Protection Plus

ESTIMATING GUIDE

Typically, the application rate will vary from 150 to 175 sq. ft. per gallon; however this rate will vary depending on the texture and absorption rate of the pavers and the width of the paver joints.

DIRECTIONS FOR USE

We recommend wearing protective goggles and latex gloves. For best results, apply Natural Luster at temperatures between 60° F and 90° F. In cooler conditions, the sealer should be warmed to approximately 70° F. Do not apply if surface or ambient temperature is below 50°F. If temperature is going to drop below freezing (32° F) make sure sealer has time to cure. A test for compatibility, penetration and adhesion is recommended.

MIXING

Natural Luster is designed to be diluted with water 1 part water and 1 part sealer with a 2 coat system (flood coat and top coat). Natural Luster requires mixing and stirring (2 minutes) prior to use.

NOTES

Pavers with high absorption rate will require additional top coats of sealer to provide protective barrier and desired enhancement. Natural Luster in not intended for submerged surfaces.

Buy Now!

NOTE: PLEASE CALL THE OFFICE FOR PRICES AND AVAILABILITY.

Additional Information

Product Data

  • 333