|
| |
Spray Gun Safety and Operating Instructions
Suttner spray guns are designed for controlling the high pressure spray of a
pressure washer. It can be used with clear water or water mixed with
commercially available detergents.
Warnings:
High pressure spray. Never direct spray toward any part of your body or any
other person.
Always engage the safety lock-off after use to prevent unintended operation.
Never block or wire the trigger lever in the open position. Obstructing the
trigger lever will cause improper operation. Discontinue use if gun valve does
not close immediately upon trigger release.
Never exceed the pressure and flow ratings of the gun.
Ensure all pressure is released from the system before attempting to repair.
Cautions:
Wear protective gloves and clothing when working with chemicals.
Wear protective gloves and clothing when working with media temperatures over
140 F.
Do not allow gun to freeze. Always store and transport gun in temperatures above
32 F.\
Inspect and maintain spray gun. Ensure safe operation by inspecting gun for
leaks or damage before every use.
Operation:
After the gun has been properly installed on a pressure washer:
1) To spray, grasp the gun handle firmly, unlock the safety lever, direct the
output in a safe direction and squeeze the trigger lever.
2) To stop spray, simply release the trigger lever while continuing to hold
firmly onto the gun handle.
3) When taking a break or upon completing the job, lock the safety lever to
prevent accidental operation.
|
